Foxeer XAT600SM DC5V-22V 17*17mm 600tvl Sony Super HAD CCD Camera

SKU: HS1177M

Availability:Out of stock

Arrival Notice

Foxeer XAT600SM DC5V-22V 17*17mm 600tvl Sony Super HAD CCD Camera

US$ 39.95
2.8 3.6
IR block


Here is super mini 600TVL Sony Super Had II CCD board fpv camera . It adopts 1/3 Sony Super HAD II CCD, Nextchip 2040 DSP, D-WDR, 2D-DNR, minimum illumination reach 0.01Lux(black/white), as well as powerful OSD menu, total weight including plastic case is 12g.
Additional Information

Additional Information

Solution 1/3” Sony SUPER HAD II CCD+Nextchip 2040 DSP
Pixel PAL: 752(H) ×582(V); NTSC: 768(H)×494(V)
TV System PAL/NTSC (based on country)
Resolution 600TVL(color)  650TVL(B&W)
Shutter Speed (CCD IRIS) PAL: 1/50~1/100000 sec; NTSC: 1/60~1/100000 sec
Video Out 75ohm, synchronize
Min. Illumination 0.01Lux
Auto Gain Off/Low/Mid/High
Back Light Compensation (BLC) Off /Back light compensation/ Strong light suppression
Private shading(privacy) 1~8 private shading area
Motion Detection (MD) On/ Off (Multi level sensitivity settable)
Auto White Balance Manual / Auto / Auto track
Mirror Horizontal Mirror optional
Negative Positive / Negative optional
Color to B&W Auto
Day / Night Shift Auto/ Color/ B&W
Menu (OSD) English menu
White Dot Repair Support
Image Adjustment Support
Power Requirement DC5V~24V
Storage Temperature -40 C ~ 60 C
Working Temperature -10 C ~ 50 C
Power Consumption 80mA
Size 26mm*26mm
Weight 12g
Package Includes 1 x Camera; 1 x Manual; 1 x OSD board; 1 x servo cable
Would be a good camera if it where not for the noise level that takes out my GPS from 2 foot away. This camera can not be flown with a GPS.
Nice compact camera, but in combination with MinimOSD it blocks the overlay of the OSD.
Nica camera, but unfortunatully it won't work as FPV camera with MinimOSD. Don't know why but with t his camera installed I won't geet an overlay image from the OSD
It would be better to put the cable plug on the top. The plug on the bottom gets in the way when tilting the camera up. The longer length of the PCB makes the plug placement on the bottom hard to work with.