KISS 24A ESC Race Edition Board- 32bit Brushless Motor Ctrl

SKU: MR1381

Availability:In stock

KISS 24A ESC Race Edition Board- 32bit Brushless Motor Ctrl

US$ 22.90
Usually dispatched in 1-2 business days


Note: If there is anything wrong with the product you buy from our website, please provide with the Kiss serial number and your order number, send email to [email protected]

This KISS ESC offers great compatibility to a wide range of motors. The fast 32it Arm Cortex CPU runs the ESC very effectively for improve reaction times.

The 24 Race Edition is laid out as a beefy ESC, which can withstand FPV race conditions. There are several mechanisms to protect your valuable equipment, and the rating of 24A won't need direct cooling.  Partial mounting works too.

No need to spend time changing firmwares, simply solder and fly (some solder skills are the only needed skills). First ESC with oneshot42 support (don't worry, Oneshot125 and normal PWM are auto detected too). Offers easy to use telemetry function over the regular servo connector which you can use in combination with our KISS-FC.


32-bit ARM Cortex MCU @ 48Mhz

Telemetry capability (current, voltage and speed / RPM will be covered by the ESC itself and to compatible devices such as our KISS FC forwarded)

Over Current Protection. Measures the current and active limiting at 30A.

Fast reacting over heating protection. Reducing the throttle when exceeding 120° C, while not simply shutting down the unit.

Advanced Auto Timing (3.25 to 30 ° are at each engine step readjusted, unique to the 32bit Kiss ESC line)

For Race Multicopter Developed (24A continuous without direct cooling *)

High max. Speed (450.000ERpm, 64.000Rpm at a 14POL Motor)

Fine speed control (about 950 steps, real resolution)

No external ElKo (electrolytic capacitor) necessary

Fast reacting throttle changes

Linear throttle response

Active freewheeling enabled (little diode losses resulting in higher efficiency)

Regenerative braking, thereby rapid throttle response at deceleration (the ESC uses active freewheeling and regenerative braking, 2 independent features which relates to each other in different working states)

Fast switching FET by the use of gate drivers

Minimal dead times by an adaptive dead time

2-5S LiPo capable

Oneshot42, Oneshot125 and normal (25 - 500Hz) PWM is detected automatically.


Current Draw: 24A Continuous

Voltage Range: 2-5s Lipo

Weight: 3.53g

Size: 19mm x 27mm x 4.5mm

Package Includes

1x KISS 24A ESC Race Edition Board


    Best Seller